Consumed Consumer . org

As I was running out of space on my DNS-323, I decided to upgrade my two 1 TB drives to 2 TB. Due to insufficient research into the matter, I was surprised to read, prior to performing the upgrade, that there are significant performance issues with these drives.

After a few attempts which ended in failure, I managed to format my 2 x 2TB 4k Western Digital drives . Now that it’s done, it seems incredibly simple. It is also “sticky”, meaning it does not need to be performed on each reboot (DUH!).

After my RAID-0 has recently failed catastrophically, the time has come to set up another pair of HDDs in my DNS-323. I figured a step-by-step howto on what I've done would not be useful only for me if I had to do it again, but to any other owner of this extremely popular unit. This is a rather long article, as it contains several smaller articles, but it is hopefully complete and suitable for a reinstall, cuz that’s the way I roll.

After successfully formatting my 2 new Western Digital 2TB discs properly, with the "advanced 4k option" , the time has come to move all the data from my existing 2TB array (1 TB + 1 TB in RAID 0) to one of the new drives. The quickest way to do this is to connect the drive via the NAS unit USB port.

After discussing options in choosing a cheap, low-end, learning VPS , we take a look here at how to set it up for secure use, for when you get a so much for so little, you want to make sure it’s only yours!

I recently bit the bullet and tried to set up my PAP with a VOIP service with my Cisco / Linksys PAP2T. Here's how it went.

A question that keeps popping up all over forums is how to convert various proprietary ISO formats into something useful and useable. We shall answer.

Now that we recovered passwords and we're in, it's time to do a little clean up of this older Win XP / BT5r1 box.

After discussing the softphone options in the first part and the VOIP device in the second, we are now looking at finding a provider and setting up the system.